Ride on Automatic Drive Stone Floor Polisher For Save Man Labour
24 heads Drive on Floor Grinder
Marble, granite, terrazzo, concrete floor
Leveling, polishing, grinding, renovating
Whole gearbox run promotes the life time and security of machine; large work areas improve the work efficiency.
Convenient to operation by driving.
With multifunction plate include magnetic discs and Velcro discs meet different clients’ demand.
Eight plates, each fix 3 pieces small discs, total 24 pieces small discs one machine, each time need fix 24 pieces polishing pads.
Handle is adjustable, is easy to control.
With inverter could adjust the speed from 0 to 1500 rmp.
Use import NSK bearing.
For stone leveling, stone polishing and grinding, concrete polishing and grinding, also apply to remove the old coat of epoxy etc...
1-Electrical QTY-Walk (Screen showing the charging electrical quantity for walking)
2-Uniform-Velocity Walking (Control the machine walk in one speed)
3-Forward/Back (Control the machine walk forward or back)
4-Charging-Walk (Switch for charging the battery for walking, after the machine connecting the 380V electric, turn on the switch for charging about 2-3 hours, turn off the switch until electric quantity is full, please don’t charge too long; Charging again when uses out of the electric.)
8-Key lock (Turn on it with the key, then you could drive the machine)
9/10- Charging-Up/Down (Turn on the two switch to charge it with electricity for up and down the chassis.
11-Down (Chassis)-Press this button to let the chassis down
12-Up (Chassis) - Press this button to let the chassis up
13-Electrical QTY-Up/Down-(Screen showing the charging electrical quantity for up and down the chassis)
14-Stop (Urgent stop the machine once something happen)
15-Motor Speed (Control the speed of grinding)
16-Motor Switch (Turn on it for starting the machine for grinding)
18-Main power switch (Turn on the switch firstly when you are ready to grinding)
21-220V Socket (Use for charging your mobile phone or something else)
22-380V Socket (For connecting the power for grinding)